In Mitcham, most failed caulking simply timed out. Everything sealed at construction is now decades past its design life.
We remove failed sealant across Mitcham completely, prepare the joints properly and reseal with the right product for each location. Every job gets the same treatment: proper prep, the correct product and a finish we would put our name on. Because we do.
Melbourne Wide
Proudly servicing all Melbourne suburbs and surrounding areas.
Premium Sealants
We use high quality, long lasting products for every application.
Residential Specialists
Experienced in homes, apartments, units, townhouses.
Free Quotes
Fast, no obligation quotes for your caulking project.
From one failed joint to a whole property refresh, the remedial services below all follow the same rule: preparation first.
We strip failed silicone back to clean substrate before anything new goes in. It is slower than overcoating, and it is why our work lasts.
Full wet area seal restoration for aging bathrooms: strip, treat, reseal, done.
Defect-period caulking failures documented and fixed, whether you are the owner chasing quality or the builder making it right.
External joints that have chalked, cracked or pulled away resealed with products built for Melbourne weather.
The failure pattern in Mitcham brick homes is predictable: everything sealed at construction fails within a few years of everything else. We often quote one room and end up renewing the whole house, because doing it in one visit is cheaper than four call-outs.
Half our remedial work in Mitcham starts during someone’s renovation, when the painter or building inspector points out every failed bead in the house. We fix the lot in one pass so the new work is not let down by the old seals. It is the same story through Nunawading and Vermont next door, which is why our runs cover the whole pocket together.
Plenty of handymen will run a bead of silicone. Caulking done properly, with the right product for each joint, is a trade of its own, and it is all we do.
Preparation Before Product
Old sealant out, joints cleaned and dried, edges taped where needed. The prep is what keeps the new bead sealed for years longer.
Quotes from Photos
Most jobs can be quoted from photos within a day. You get a firm price without waiting in for an inspection.
Clean Lines, Clean Site
Drop sheets down, edges taped, waste taken with us. The only evidence we were there is the finished line.
New & Remedial Work
New installations, renovations and silicone removal & replacement.
Local & Trusted Team
Reliable, friendly service from experienced caulkers.
Free Online Quotes
Fast, no obligation quotes tailored to your home.
Contact us to discuss your project and requirements.
We assess the job and provide a clear, upfront quote
We prepare the surfaces and apply premium sealants.
We ensure a clean, neat and long lasting finish.
Our crews cross Mitcham regularly on jobs through Melbourne’s east. If you are in one of the nearby suburbs below, you are covered too.
Yes, it is a big part of remedial work. We do not badmouth the last trade, we just fix the job and document what we found.
Nine times out of ten it was applied over a joint that was not clean and dry, or the wrong product was used for the movement in that joint. Both are avoidable.
Almost always. Sealants come in extensive colour ranges and we match to grout, benchtops and frames as closely as the range allows.
Yes. Before and after photos plus a plain-language summary of the failure cause is available on request.
Call 0452 151 535 or 0411 879 540, or send through a few photos for a free quote. Fast response, tidy work and sealant that lasts: that is the whole pitch.
Request a free quote online
Servicing all Melbourne suburbs
0452 151 535
